MX

MX, das ist die Bezeichnung für leistungsstarke Großraum-Ladewagen mit einem Transportvolumen von 33 bis 40 m³. Sie haben als echte Doppelzweck-Ladewagen ihre Stärken als Lade- und Dosierwagen bei der Grünfutterernte, ebenso als Transportwagen beim Einsatz in der Ladekolonne von Feldhäckslern. Dabei überzeugen sie durch Vielseitigkeit, Zuverlässigkeit, Schlagkraft und Wirtschaftlichkeit.

• Fully-featured dual-purpose forage wagon
• Articulated drawbar for high ground clearance
• Drawbar suspension for comfortable rides
• Pick-up unit without cam track with w-shaped tines
• Large cutting rotor and feed rotor with wide Hardox steel plates
• Steel structure and steel floor
• Pivoting headboard
• Sloping chain-and-slat floor

MX, this is the designation for high-performance large-capacity loading and forage transport wagons with a transport volume of 33 m³ to 40 m³. Genuine dual-purpose forage wagons, they run in both the grass harvest chain as self-loading machines with discharge rollers and in the maize transport chain as forager-filled silage trailers. These machines score on versatility, reliability, efficiency and flexibility.

• Self-loading and forager-filled forage wagons
• All-steel body with 33 m³ loading volume
• Hydraulic crop guide flap on the front wall of the loading space
• Unloading with or without discharge unit
• Cutting rotor with 41 blades

The robust all-steel body with 33 m³ loading volume and the large tandem chassis with steered rear axle make the MX 330 a genuine loading and forage transport wagon. The machine is available with discharge rollers (GD) and without the rollers (GL). A hydraulically operated silage hatch at the top of the headboard is standard-fit for easier filling from the leading forager.

• Self-loading and forager-filled wagons
• 37 m³ or 40 m³ capacities
• The all-steel machine is available with and without discharge rollers – as GD or GL version
• Hydraulic pivoting headboard
• Rotor cutter with 41 blades

The two dual-purpose forage wagons MX 370 and MX 400 feature the proven designs and innovative technical solutions of the RX series as the base for implementing new and practical ideas.

• Standard ball hitch for bottom attachment
• Articulated drawbar for high ground clearance
• Drawbar suspension for comfortable rides

Varying conditions, high payloads, challenging unloading sites and long-distance travel at speed are challenges that call for a very stable, safe and shockload cushioning running gear. It is down to the steered tandem axle, the ball hitch and the articulated drawbar that the MX is up to any job and situation.

• Wide pick-up for clean and comprehensive gathering
• No cam track means few moving parts, minimized service and maintenance and quiet running
• 6.5 mm thick double tines with large coil diameter
• Tines arranged in a ‘W’-line

The EasyFlow pick-up excels by virtue of clean and thorough gathering – at high work rates and at low wear rates even in difficult conditions. Made up of few moving parts, the unit runs extremely quietly and dependably.

• High loading capacity thanks to wide rotor with large diameter
• Smooth running thanks to rows of tines arranged in a spiral
• Easy pulling blades for exact and scissor-like cuts

Powerful and low-maintenance, the MX rotor operates very smoothly and feeds the crop super gently and consistently into the machine. The rotor blades give exact cuts, stay sharp for a long time and are very easy to replace.

• Convenient and quick sharpening of the blades
• Sharpening 41 blades takes less than four minutes
• Gives all blades a consistent grind
• Reduces fuel consumption and improves the forage quality

The automatic SpeedSharp blade grinder sharpens your blades in just a few minutes. Grinding the blades right on the machine and on the site gives you great flexibility and saves time you would otherwise spend on replacing dull blades – an important detail when your aim is consistently high-quality forage and good fuel economy.

• Steel structure and steel floor
• Pivoting headboard
• Double scraper conveyor, sloping towards the front
• With or without discharge rollers
• Optional cross conveyor belt for unloading fresh feed in the barn

The MX dual-purpose loading and forage transport wagons are designed with an all-steel loading space for the toughest practical applications. The pivoting headboard makes for easier filling – both from the forage harvester or the pick-up. The heavy-duty chain-and-slat floor feeds even heavy forage swiftly and consistently to the rear for unloading.

• Clear and convenient
• Easy and user friendly
• ISOBUS compatible

Working with the ­KRONE comfort on-board electronics significantly simplifies, improves and speeds up work with the MX dual-purpose loading and forage transport wagon. Two different terminals are available to cater for different applications and needs.

The compact DS 500 terminal has a 5.7" colour display screen and can be operated with 12 function keys, the touchscreen or the scroll wheel on the back. An optional joystick is available for even more convenient operation.